How to Drain a Hot Water Heater Quickly

Posted on

How to Drain a Hot Water Heater

How to Drain a Hot Water Heater Quickly – Draining your water heater as soon as a yr gets rid of sediment from the tank that may purpose it to work more difficult and cost more to use.

  1. Begin via turning off the power or fuel to the water heater.
  2. Subsequent, turn the bloodless water delivery valve off that allows water to flow into the heater.
  3. Hook a lawn hose to the drain valve at the lowest of the tank and run it outside to the ground.
  4. Open the drain valve in which the hose is hooked up.
  5. Open the strain relief valve on top of the tank via pulling up on it.
  6. Allow the water inside the tank to drain out.
  7. While the tank is empty, open the bloodless water valve for a few minutes to flush out the last closing sediment.
  8. Near the drain valve and pressure alleviation valve and permit the tank to fill again up.
  9. Relight the pilot to the heater if gas, and turn it on.
  10. If electric powered, turn the breaker to repair electricity to the water heater.

 

For in addition statistics, see our video on water heater maintenance.

(Visited 64 times, 1 visits today)