Types and Grades of Travertine Tile – What is Travertine Tile? Before buying your travertine tile, it is important to turn out to be typical with trade phrases to select the type and grade of tile most correct for your applications. These days there is no trade standard call for the grades of travertine, most businesses use the names indexed beneath. The two types of travertine tiles are created by using various chopping strategies, not by using alternative types of travertine stone.

What is Travertine Tile? Types and Grades of Travertine Tile

There are three grades of travertine: premium, standard, and commercial. Fill upgrade, which is each piece known as first grade, is a tile that has been completely cut and has a uniform thickness across with tiny filler. Standard grade, additionally referred to as 2d grade, will additionally be completely cut with a uniform thickness, besides the fact that, there will be a bit more filler in the stone. Commercial grade, additionally known as third grade, may not be completely cut on all sides and it will not have a uniform thickness. Moreover, there will be a great deal more filler inside the stone.

Types and Grades of Travertine Tile

Premium or First Grade

This grade deals the finest selection of hues free from black or gray discoloration in the travertine tiles.
The travertine tiles are fastidiously selected to be in step within color.
The tiles are double stuffed, first, by equipment and then by hand if any holes remain.
None of the travertine tiles of this grade will have large holes that were filled.
The edges of the tiles are sky’s the and lighting fixtures sized with uniform beveled edges.

Standard or 2d Grade

This class deals the 2d biggest selection of travertine tile colorings free from gray or black discoloration.
The travertine tiles are fastidiously selected to have an in line with color across the lot.
Tiles are double stuffed as in the fill-up grade.
A few large holes are allowed in standard grade travertine tiles. Moreover, a few holes may be crammed through the full thickness of the tile.
The color may include a few striations or swirls.
The edges of the tiles are the sky the and lights sized with uniform beveled edges.

Commercial or Third Grade

Large color adaptations are allowed inside of the tile adding gray or black markings.
Small unfilled holes are allowed as are small defects in sizing and honing.
The tiles are not hand filled.
It is relevant for large voids to be filled.
Small holes that run from the floor to the backside of the tile are allowed.
Edges may be cracked or broken.
Tiles may be cohesion without color selection or sorting.

Travertine Types

Cut Types

Due to the bedding planes inherent in most travertine, it is feasible to obtain a dramatically alternative look relying on the cut type selected. The two cut types used to create travertine tiles are the Vein Cut and the Fleuri Cut. The travertine itself is the same for each type of tile; it is only the type of cut that explanations the stone to differ in appearance.

Vein Cut

Vein cut describes the slicing manner by which a cut is made in opposition to the bedding planes, or alongside the vein. This exposes the edge of the formation and provides the travertine tile a linear pattern.

Fleuri Cut

Fleuri cut, which is additionally known as a cross cut, is a cut made parallel to the bedding aircraft. This exposes a random sample that is often round. This cut does result in a strong tile; in spite of the fact that, it is not ideal for high-traffic locations due to holes that may seem with heavy use. After inspires, if holes should seem, it is standard apply to fill those holes as a substitute for changing the tile.

What standards signifies good quality travertine tile?

All four corners of the tile should be cut at ninety degrees.
The shade of the stone should not be marred my rust colored markings on both sides.
There should be no pores in the filling of the stone.
The filling should consist of a tough resin that will not chip; cement is unacceptable.
The side cuts should be completely perpendicular; a slope is unacceptable.
The shade of the tile should be per across the lot with restrained color variations.
The thickness of the tile should be measured in inches and should be 18” x 18”.
The delivery crates should be strong wood pallets authorized for forklifts.
The face of the tile should be seen from each side of the transport crates.
Styrofoam should be used on the backside and sides of the tiles for coverage.